| Product Name | Jaw Crusher Wear Parts Set |
| Component Type | Wear Parts |
| Applicable Crusher Type | Jaw Crusher |
| Material | High-Manganese Steel (e.g., Mn18Cr2, Mn13Cr2) |
| Hardness (Typical) | 55-65 HRC |
| Tensile Strength (Typical) | 800-1000 MPa |
| Impact Toughness (Typical) | 25-40 J |
| Manufacturing Process | Casting, Machining, Heat Treatment |
| Key Components | Jaw Plates (Fixed & Movable), Toggle Plates, Toggle Seats, Side Plates, Grizzly Bars (if applicable) |
| Surface Finish | Machined to specifications, as-cast for some components |
| Dimensional Tolerance | As per OEM specifications or industry standards for crusher parts |
| Weight (Typical per set) | Varies significantly by crusher size (e.g., 50 kg to 5000 kg+) |
| Corrosion Resistance | Good inherent resistance due to high manganese content, can be enhanced with specific alloys |
| Abrasion Resistance | Excellent, primary design consideration |
| Impact Resistance | High, to withstand crushing forces |
| Service Life | Dependent on material, application, and operating conditions (e.g., 3,000-10,000+ operating hours) |
| OEM Compatibility | Specify target OEM and model number for exact fitment |
| Certifications | Material test reports, dimensional inspection reports |
| Packaging | Industrial packaging to prevent damage during transit |
| Storage Conditions | Dry, protected environment |
| Country of Origin | Specify manufacturing location |
| Warranty | Standard manufacturer's warranty against defects in material and workmanship |
